Knowledge Centre
How Do You Secure Council Planning Approval for Drainage?
Last Updated: 14 November 2026
Quick Summary
Securing drainage approval means submitting a drainage strategy with scaled drawings, surface water and foul calculations, infiltration test results and a SuDS maintenance plan that match the site's levels and ground conditions. Check with the local planning authority early on what level of detail your application needs, and respond point by point to any LLFA objection.
- Drainage information is required when a project adds roof area, changes levels or creates hard surfaces.
- Ask the local planning authority in writing whether your application needs a drainage strategy.
- Design the drainage strategy first and let it drive the design, not the reverse.
- Submitting a drainage layout without invert levels or gradients can be returned as incomplete.
- Confirm who will own and maintain the drainage system before the council determines the application.
Table of Contents
- When Drainage Information Is Required for Planning Permission
- Building a Drainage Strategy for Planning Permission
- Sustainable Drainage Systems (SuDS) Requirements Explained
- Flood Risk Assessment for Planning: What to Include
- The Submission Checklist: Drawings, Calculations and Evidence
- How to Respond to Council or LLFA Objections
- Maintenance, Adoption and Long-Term Responsibility
- Get Your Drainage Design Reviewed Before You Submit
- Frequently Asked Questions
When Drainage Information Is Required for Planning Permission
Drainage information becomes a planning requirement the moment your application could affect how surface water or wastewater leaves the site. Applications are frequently held up by thin drainage detail. If your project adds roof area, changes ground levels, or creates a new hard surface, expect the local planning authority to ask how water will be managed. The drainage approval process starts long before you submit. How to apply for council drainage approval step by step sets out the process so you understand what lies ahead.
Extensions, New Builds and Change of Use
Not every project needs a full drainage strategy. A small rear extension with no new impermeable area often passes with a simple note on the drawings. New builds almost always need a proper surface water strategy. Change of use can trigger a requirement too, especially where the new use creates more runoff or different wastewater flows.
The safest approach is to check with the local planning authority early. Ask one direct question: does this application need a drainage strategy, and at what level of detail? Getting that answer in writing saves weeks later.
What the Local Planning Authority Expects to See
Planning officers want evidence, not reassurance. A drainage approval submission should show:
- Where surface water will go and how it gets there
- How foul drainage connects to the public sewer or a treatment system
- That the design works with the site's levels and ground conditions
- That flood risk has been considered and addressed
Missing drawings or vague statements are the most common reasons an application comes back with conditions or a request for more information. National planning guidance sets out the framework, but each authority applies its own local validation list.
Building a Drainage Strategy for Planning Permission
A drainage strategy for planning permission is a document that explains how your site will manage surface water and foul flows, with the drawings and calculations to back it up. It is not a marketing document or a one-page summary. It is technical evidence.
Start with the site. Note the levels, the soil, the existing drainage, and any watercourses nearby. Then work out the flows: how much rainwater lands on the new surfaces, and where it can safely go. Only then design the system.
A common mistake is designing the pipes first and writing the strategy afterwards. The strategy should drive the design, not describe it after the fact. When the two match properly, the council has far less to question.
Sustainable Drainage Systems (SuDS) Requirements Explained
Sustainable drainage systems, usually called SuDS, manage surface water by slowing it down and letting it soak away or be stored before discharge. SuDS are increasingly expected on new development, and national guidance sets out the position.
The design follows a hierarchy. In simple terms:
- First, soak water into the ground where ground conditions allow
- Next, store it in ponds, basins or tanks and release it slowly
- Last, discharge to a watercourse or sewer at a controlled rate
You must show why you chose each option and why you ruled out the ones above it. A deeper explanation of the SuDS hierarchy helps you apply it correctly to your scheme. For most residential projects, infiltration testing results decide the answer.
Flood Risk Assessment for Planning: What to Include
A flood risk assessment for planning explains whether your site is at risk of flooding and what you will do about it. It covers river flooding, surface water flooding, groundwater and sewers.
The assessment should include:
- The site's flood zone and the data behind it
- The history of flooding on or near the site
- How the development changes flood risk on and off site
- Flood mitigation measures built into the design
Small extensions in low-risk areas may only need a short statement. Sites near a watercourse or in a higher flood zone need a full assessment. If your project involves a basement, guidance on obtaining a flood risk assessment for a basement conversion walks through what is needed.
The Submission Checklist: Drawings, Calculations and Evidence

A complete drainage approval submission usually contains the following. Use this as your checklist before you upload anything, but treat each item as a specification rather than a tick-box. Councils reject submissions that include a drawing without the right annotations, or a calculation without the method behind it.
- Site location plan with the red line boundary, at a scale of 1:1250 or 1:2500, showing the site in relation to nearby watercourses and ordinary watercourses
- Drainage layout drawing showing pipes, gullies, manholes and SuDS features, with pipe diameters, gradients and invert levels annotated
- Levels drawing showing falls and discharge points, referencing a known datum (usually Ordnance Datum) and confirming the connection point to the public sewer or watercourse
- Surface water calculations for the design storm, including an allowance for climate change as required by the local authority
- Foul drainage calculations and connection details, including the proposed connection point and confirmation from the sewerage undertaker that the connection is feasible
- Infiltration test results or ground investigation notes, with test locations marked on the layout drawing
- Flood risk assessment where required, covering all sources of flooding and including a sequential test if the site is in a higher flood zone
- SuDS maintenance plan, setting out who will maintain each feature, how often, and what records will be kept
Drawings and Calculations
Drawings must be to scale and clearly labelled. Every pipe, manhole and SuDS feature should have a unique reference that matches the calculations. Calculations must show the method and the inputs, not just the final number. For surface water, this means stating the rainfall intensity, the area drained, the runoff coefficient and the design storm duration. For foul drainage, it means showing the occupancy or usage figures and the resulting flows. Calculation sheets that cannot be followed are difficult for officers to assess, so include a short narrative that walks through the logic.
Submitting a drainage layout without invert levels or gradients can lead to an application being returned as incomplete.
Supporting Statements and Assessments
A short design statement ties everything together. It explains the reasoning in plain words, including why you chose the drainage hierarchy options you did and why you ruled out the ones above them. This is often the document a planning officer reads first, so keep it clear and honest. If your scheme relies on infiltration, state the test results and where they were taken. If it discharges to a watercourse, confirm you have checked the ordinary watercourse consent requirements with the lead local flood authority (Apply for consent to work on an ordinary watercourse). The design statement should also confirm who will own and maintain the drainage system after construction, because councils increasingly ask for this before determining the application.
Here is what a complete drainage approval submission usually contains, with the specification for each item.
| Item | What it must show |
|---|---|
| Site location plan | Red line boundary at 1:1250 or 1:2500, nearby watercourses |
| Drainage layout drawing | Pipes, gullies, manholes and SuDS with diameters, gradients, invert levels |
| Levels drawing | Falls and discharge points, Ordnance Datum, connection point |
| Surface water calculations | Design storm with climate change allowance |
| Foul drainage calculations | Connection details and sewerage undertaker confirmation |
| Infiltration test results | Test locations marked on the layout drawing |
| Flood risk assessment | All sources of flooding, sequential test if required |
| SuDS maintenance plan | Who maintains each feature, how often, records kept |
How to Respond to Council or LLFA Objections
Objections are a normal part of the process. The Lead Local Flood Authority, or LLFA, is the body that advises the council on flood risk and drainage. When it objects, it usually wants more evidence, not a different scheme.
Start by reading the objection carefully and identifying exactly what evidence is missing. LLFA objections often fall into a few categories: insufficient infiltration testing, unclear discharge rates, missing maintenance details, or a failure to demonstrate that the drainage hierarchy has been followed.
Respond point by point. Quote each objection and answer it directly. If the LLFA asks for infiltration testing, provide the results and confirm the test locations on the layout drawing. If it questions discharge rates, show your calculations and the limiting discharge rate you have applied.
Watch out: replying with a new drawing but no explanation is the fastest way to get a second objection. Officers need to see your reasoning, not just a revised plan.
If you disagree with an objection, say so politely and provide evidence. Our guide on how to resolve council drainage objections sets out the practical steps, including how to prepare a response schedule and when to request a meeting with the case officer.
Maintenance, Adoption and Long-Term Responsibility
Drainage approval is not the end of the story. Someone must own and maintain the system for the life of the development. Councils increasingly want this confirmed before they grant permission.
SuDS features need routine work: clearing gullies, checking inlets, and emptying silt traps. If a management company or homeowner will take responsibility, say so in the submission. If you plan to offer the system for adoption, confirm the adopting body's requirements early. Our step-by-step guide to clearing drainage planning conditions covers what happens after approval.
Get Your Drainage Design Reviewed Before You Submit
A second review of your drawings, calculations and design statement before submission can help identify gaps that councils commonly look for.
The Drainage Designers provide drainage design for homeowners, architects and developers across the UK, including flood risk assessments and SuDS design, and support clients through council and LLFA queries.
Get in touch to discuss your plans and site details.
Frequently Asked Questions
What drainage information is required for a planning application?
Most applications need a drainage strategy showing surface water and foul drainage, a drainage plan with site levels and discharge points, and supporting calculations. If the site is in a flood risk area, a flood risk assessment is also required. The local planning authority will check that the proposals meet the Lead Local Flood Authority's requirements for sustainable drainage systems, so include evidence of how runoff will be managed and where it will discharge.
Do I need a drainage strategy for a house extension?
A drainage strategy is often requested for extensions, especially where new impermeable surfaces are created or the existing drainage is unclear. Even for small domestic projects, the council may ask for a drainage plan showing how surface water will be managed. If you are unsure, check the validation checklist published by your local planning authority or ask a drainage designer to review your plans before submission.
What are the common reasons for drainage planning application refusal?
Applications are often refused because the drainage strategy lacks detail, the discharge rate is unproven, or the flood risk assessment is missing or incomplete. Other common issues include no evidence of maintenance arrangements for SuDS and failure to address the Lead Local Flood Authority's advice. Providing clear drawings, calculations and a maintenance plan upfront reduces the risk of refusal or a drainage condition.
How do I prove my drainage design complies with Building Regulations?
Compliance with Building Regulations is usually demonstrated through detailed design drawings and calculations prepared by a competent drainage engineer. These should show pipe sizes, gradients, storage volumes and discharge rates that meet the relevant standards. For SuDS, include infiltration test results and a maintenance schedule. The local authority building control team or an approved inspector will review this evidence before signing off the work.